Fully closed one chamber loop cleaning systems for Misprints, Stencils, Squeegees, PumpPrints and Screens.
Features
- MixAssist® system – easy way of accurate mixing water with cleaning agent
- Two (optional three) tank system with two (optional three) separate circuit functions
- Vertical rotor system with CSR® (Cepter Spray Rotors)
- Fully automatic process: cleaning – rinsing - drying
- 100% closed circuit process – no water/waste water connection required
- All functions and settings are controllable via 10,1'' touchscreen display
- 100% stainless steel design
- Made in Slovenia
Applications
- PCBs
- Screens
- Misprints
- Stencils
- PumpPrints
- Squeegees
More info
Process description:
Cepter SC 400 VC is a fully automatic single chamber 2-step process cleaning system.
Cleaning/Rinsing process: cleaning and rinsing fluids are pumped from separate tanks to CSR® (Cepter Spray Rotors) with special nozzles. Efficient cleaning of materials is achieved and ensured by Rotor design. Fluid circulates in loop through filter system to remove contamination for rinsing process.
Drying process: thoroughly cleaned materials are then efficiently dried. This is achieved by a highly efficient combination of hot air ventilation system and high pressure compressor.
Standard equipment
- 2 tanks / 3 pumps
- 100% closed loop circuit
- Horizontal CSR® (Cepter Spray Rotor)
- 10,1'' touchscreen display
- Coarse filter inside process chamber
- Sediment filter inside fluid tanks
- Fine 10'' filter in each circuit
- Cleaning fluid heater
- Rinsing fluid heater
- Final rinsing fluid heater
- 2 Air heaters
- Electric safety door locker
- Complete machine body in stainless steel
Optional equipment
- Cartridge for deionized and demineralized water
- Active Carbon filter
- Compressed air drying system combined with CSR® (Cepter Spray Rotors) with special nozzles
- FDS® (Fluid Drain System)
- Conductivity measurement / pre-rinse circuit
- Fluid leakage tray in stainless steel
- Leakage warning system
- Status light
- Mechanical carrier frame
Technical specifications
Technical data | |
Chamber dimensions | W 400 mm x D 1.000 mm x H 1.000 mm |
Capacity | Screens, stencils, frames up to size D 980 mm x H 910 mm |
Volume cleaning tank | 65 l |
Volume rinsing tank | 65 l |
Exhaust connection | Ø 100 mm |
Power supply | 400 V AC, 25A / 3 Ph / 50 Hz |
Power consumption | ca. 3,3 kW |
Temperature range cleaning | adjustable up to 65°C |
Temperature range rinsing | adjustable up to 65°C |
Temperature range drying | adjustable up to 95°C |
Filter system | 3-stage: 1. coarse filter < 2 mm; 2. sediment filter inside fluid tanks; 3. fine filter 10'' (1 – 100 µm) |
Conductivity range | 0 – 300 µS/cm |
Noise level | < 70 dB |
Dimensions | W 980 mm x D 1.580 mm x H 1.900 |
Weight | 480 kg |
*Product availability, apperance, technical specifications and details are subjected to continuous development. As such, we accept no liability for errors, omissions or changes to this information.